Adaprox Door/Window Sensor detects the open/close status of household facilities like doors, windows, and drawers. With Adaprox Cloud services, the low-energy sensor can be part of the smart scenes and provide essential trigger conditions for home automation.
*An Adaprox HomeHub is required to connect the sensor to the Zigbee network.
Adaprox Home App is the mobile platform for controlling Adaprox devices. You can search "Adaprox Home" in the mobile application store to install the App.
Slide down the rear cover to open the device case. Then remove the battery insulation film to power on the product.
Long press the reset button for 10 seconds and release, the device is ready to be paired when the green LED flashes.
Open the App and click the "+" button on the upper right corner, then click the sensor button in the "Add a device" panel and follow the instructions in the app to pair the device.
After the sensor is paired, you can long press the device button in the main page of the App to inspect sensor status and view alarm history.
To install the sensor:
1. Remove the protective films on the back side of both the sensor unit and the magnet.
2. During installation, align the mark of the main device and the magnet.
3. Install the product on a door or window with the main device fixed on the door or window frame.
The automation function is available in the App to connect different devices. Each automation contains a series of trigger conditions and target actions. The target actions will be automatically triggered when the conditions are met.
To set up an automation, click the “+” button in the upper right corner at the automation page. You can use the sensor as a trigger condition and create target actions with other Adaprox appliances.
Do not install the product outdoors, on an unstable base, or anywhere unprotected from the rain.
Do not place magnetic metals or other objects near the product to maximize signal strength. When pasting and installing, it is necessary to ensure that the installation place of the sensor should be smooth, flat, dry and clean.
