Fingerbot is the world’s smallest robot for smartly controlling different types of buttons and switches. It can control your existing home appliances with robotic clicks. Switch lights via App, schedule a morning coffee, activate your vacuum cleaner with voice command, and remotely power on your office PC. Now all these become effortless with Fingerbot.
MeshHub App is the mobile platform for controlling MeshHub devices. You can search "MeshHub" in the mobile application store to install the App.
To power on the device, please open the case from behind and remove the battery insulation sheet before use.
Open the App and click the "+" button on the upper right corner, then click the sensor button in the "Add a device" panel and follow the instructions in the app to pair the device.
After the device is connected successfully, click the “Device” tab at the bottom bar. The button representing your Fingerbot will appear in the device collection panel. You can click it to trigger the Fingerbot’s default action.
Long press the device button to enter the device control panel. There are more options for adjusting the device, such as mode choice, up/down movement, sustain time, etc.
Note: To ensure the best performance. We recommend resting the device for 30 seconds after it performs a click.
To install your Fingerbot:
1. Clean the surface of the button panel where you want to install the Fingerbot.
2. Attach the Fingerbot to the panel using a double-sided tape provided in the Fingerbot package.
3. Connect your Fingerbot with the App and calibrate the movement of the Fingerbot’s robotic arm to fit the button. The "Down Movement'' parameter should be set to the value at which the Fingerbot’s arm can just press the button. Note: Improper movement settings may bring additional resistance and reduce the life of your Fingerbot.
4. After installation, we recommend resting the device for 24 hours to reach maximum adhesion.
Robotic Arm Extension
With the modular design, the Fingerbot’s arm is replaceable in order to meet different needs in diverse situations. We designed three types of Fingerbot arms and included them in the Fingerbot ToolPack (needs to be purchased separately). Also, we provide free 3D-printing templates for you to design customized Fingerbot arms. Visit www.meshhub.io to download the digital files.
The product is not waterproof. Do not install it on an underwater appliance.
The product contains a battery, therefore prohibited in the humid, high-temperature environment.
Do not hinder the movement of the Fingerbot's arm when it is working. Otherwise it may cause the arm to fall off and damage the motor inside the Fingerbot.
Dimensions: 34.5 x 34.5 x 34.5 mm
Weight: 38g
Wireless protocol: Bluetooth Low Power 4.2
Battery type: CR2
Stall torque: 2.0 kgf·cm
Maximum arm movement: 12 mm
Working temperature: -10℃ ~ 45℃
