Adaprox LED Bulb utilizes Wi-Fi technology to connect to the Adaprox server and achieves a variety of cloud control functions. It brings a pure and comfortable daily lighting experience and a longer service life. The use of newly-designed LED beads makes the lighting effect more soft and uniform. With MeshHub App, you can remotely control the bulb and play with millions of color combinations plus a wide white temperature range.
Fit the bulb to a bulb socket. The bulb should start to flash rapidly for pairing.
If the light does not flash or blinks slowly, turn the bulb off for 2 seconds, turn it on for another 2 seconds. Repeat such action 3 times consecutively, that is "on-off-on-off-on-off-on", then the bulb will reset itself after it starts to blink quickly.
MeshHub App is the mobile platform for controlling Adaprox devices. You can search "MeshHub" in the mobile application store to install the App.
When the bulb starts to blink quickly, open the App and go to the “Add a device” page. Click the bulb button and follow the instructions in the App to pair the device.
Device Control
After the device is connected successfully, click the “Device” tab at the bottom bar. The button presenting the bulb will appear in the device collection panel. You can click it to switch the power state of the bulb.
Long press the device button to go to the device control page where there are more adjustment options such as device mode, light color, temperature and brightness.
